Zhejiang Sunawei Valve Co., Ltd
+86-577-67330098
Catherine Huang
Catherine Huang
Industrial Design Specialist for Sunawei Valve. Leading the creation of ergonomic and efficient valve designs that meet modern industrial standards.
Contact Us
  • Tel: +86-577-67330098
  • Fax: +86-577-67998131
  • Mob: +8618757788866
  • Email: snv@sunawevalve.com
  • Add: Anfeng Industrial, Oubei Town, Wenzhou City, Zhejiang, China

What types of actuators can be used with a Flange Globe Valve?

Jul 30, 2025

Hey there! As a supplier of Flange Golbe Valve, I often get asked about what types of actuators can be used with these valves. Well, let's dive right in and explore the options together.

Electric Actuators

Electric actuators are super popular when it comes to flange globe valves. They're easy to install and operate, and you can control them remotely. These actuators use an electric motor to drive the valve stem, opening or closing the valve.

One of the great things about electric actuators is their precision. You can set them to open or close the valve at a specific degree, which is really useful in applications where you need to control the flow rate accurately. For example, in a chemical processing plant, you might need to adjust the flow of a certain chemical precisely. Electric actuators can do that job with ease.

5-C95800-150LB-FF-handle-wheel-angle-globe-valveangle globe valve

They also come with built - in limit switches. These switches stop the actuator when the valve reaches its fully open or fully closed position, preventing any damage to the valve or the actuator itself.

However, electric actuators do have some drawbacks. They rely on a continuous power supply. If there's a power outage, the valve might not function as intended. Also, they can be a bit more expensive upfront compared to some other types of actuators.

Pneumatic Actuators

Pneumatic actuators use compressed air to operate the valve. They're known for their fast operation and high - thrust capabilities. When you need to open or close a valve quickly, pneumatic actuators are a great choice.

In industries like oil and gas, where quick shut - offs are crucial for safety reasons, pneumatic actuators are widely used. For instance, if there's a sudden pressure surge in a pipeline, a pneumatic actuator can close the flange globe valve in a matter of seconds.

Pneumatic actuators are relatively simple in design, which means they're easy to maintain. They don't have as many moving parts as electric actuators, reducing the chances of mechanical failure.

But there are some cons too. You need a reliable source of compressed air. If the air supply system fails, the actuator won't work. And sometimes, the air can contain moisture or contaminants, which can cause corrosion inside the actuator over time.

Hydraulic Actuators

Hydraulic actuators use a liquid, usually oil, to generate the force needed to operate the valve. They're capable of producing very high forces, making them suitable for large - sized flange globe valves or applications where high - pressure resistance is required.

In power plants, especially those dealing with high - pressure steam or water, hydraulic actuators are commonly used. They can handle the extreme conditions and ensure smooth operation of the valves.

One of the advantages of hydraulic actuators is their ability to maintain a constant force. Once the valve is in a certain position, the hydraulic system can hold it there without any additional energy input.

However, hydraulic systems are more complex than pneumatic or electric ones. They require a hydraulic pump, reservoir, and a network of hoses and valves. This complexity means higher installation and maintenance costs. Also, if there's a leak in the hydraulic system, it can be messy and environmentally harmful.

Manual Actuators

Let's not forget about the good old manual actuators. These are the simplest form of actuators, and they're operated by hand. They're often used in applications where automation isn't necessary or where the valve doesn't need to be adjusted frequently.

For example, in small - scale plumbing systems or in some low - pressure industrial processes, manual actuators are sufficient. You can use a handwheel or a lever to open or close the flange globe valve.

Manual actuators are inexpensive and easy to install. There's no need for a power source or a complex control system. But they do require physical effort to operate, and they're not suitable for applications where quick or precise adjustments are needed.

Choosing the Right Actuator

When it comes to choosing the right actuator for your flange globe valve, there are several factors to consider.

First, think about the application. If you're in a critical industry where quick response times are essential, pneumatic or hydraulic actuators might be the way to go. If you need precise control and remote operation, electric actuators are a better choice. And if it's a simple, low - tech application, a manual actuator could be sufficient.

Second, consider the size and pressure rating of the valve. Larger valves or those with high - pressure ratings will require actuators with more force - generating capabilities, like hydraulic actuators.

Third, think about the cost. This includes not only the upfront cost of the actuator but also the long - term maintenance and operating costs.

Finally, consider the environment. If the valve is located in a harsh environment with high temperatures, corrosive substances, or high humidity, you need to choose an actuator that can withstand these conditions.

Our Product Range

As a flange globe valve supplier, we offer a wide range of valves, including Cast Steel Bellow Seal Globe Valve and Angle Type Globe Valve. We can also help you choose the right actuator for your specific needs. Whether you need an electric, pneumatic, hydraulic, or manual actuator, our team of experts can provide you with the best advice and solutions.

If you're interested in our products or need more information about actuators for flange globe valves, don't hesitate to get in touch. We're here to assist you with your procurement and answer any questions you might have. Let's work together to find the perfect valve - actuator combination for your application.

References

  • Valve Handbook, 4th Edition, by J. S. Berard
  • Actuator Technology: A Practical Guide, by T. R. Brown