Add: Anfeng Industrial, Oubei Town, Wenzhou City, Zhejiang, China
1/
Fully Welded Trunnion Ball Valve
Material Structure: A105,LF2,F304,F316,F11,F22
Working Pressure: Rating: 150 Lbs. to 2500 Lbs.
Nominal Diameter: NPS2~32”,DN50~800mm
WorkingTemperatur: -46to425ºC,-29~560 ºC
Shipping & Delivery: 20-25 days lead time; deliver by ship from Ningbo port or Shanghai port
Send Inquiry
Description
Introduction
Fully Welded Trunnion Ball Valve is used for shutting off and regulating high-pressure, high-temperature, and corrosive pipeline media, and is suitable for long-distance pipelines.
Advantages
High Pressure Sealing
Trunnion fixed ball, bidirectional seated seal, pressure rating Class 1500–2500, low-pressure spring seated seal leakage ≤0.01% of rated flow.
High Temperature and Corrosion Resistance
Valve body and ball are available in carbon steel, stainless steel, and alloy steel. Heat treatment ensures uniform grain size and eliminates weld defects. Applicable
temperature range: -29℃ to 550℃.
Easy Maintenance
High-strength all-welded valve body. Top-entry design allows for field replacement of the seat and ball without pipe disassembly, facilitating maintenance.
Manual, gear, pneumatic, hydraulic, electric, pneumatic-hydraulic composite actuators; Limit switch, switch signal feedback, remote control interface
Customizable Top-In Maintenance and Oil Filling Port
Top-In Removable Structure;
On-Site Seat/Ball Replacement;
Number and Location of Sealant Injection Ports
Customizable Size and Pressure Rating
Nominal Diameter: DN15–DN250mm;
Pressure Rating: Class 150–2500
Overall length, valve body wall thickness, weld type
FAQ
Q: 1.What is the difference between ball valve and trunnion ball valve?
A: A general rule of thumb is floating ball valves are best for low- to medium-pressure scenarios, and trunnion ball valves are best for high-pressure projects. However, trunnion valves are the most versatile, so they will work in most cases.
Q: 2.What is the purpose of trunnion in a ball valve?
A: The trunnion supports the ball, ensuring stability and controlled rotation. Bearings reduce friction, while seats provide sealing against pressure. The body construction can be side entry or top entry, allowing for maintenance without removing the valve from the pipeline.
Q: 3.What are the advantages of a floating ball valve?
A: Floating ball valve is simple in design, small in size and weigh less, Plastic is used for sealing purposes, which has a good sealing performance and is safe to use, It is easy to operate, fully open and closed position, at ease by remote control.
Q: 4.What is the most durable ball valve?
A: Stainless steel ball valves offer a long-lasting option, even when used in highly corrosive environments; 316 stainless steel is a particularly corrosion-resistant alternative that includes more nickel than standard stainless steel, as well as the addition of molybdenum - a silvery metal with a very high melting point.
Q: 5.Why use a ball valve instead of a gate valve?
A: Because of their design, ball valves can perform an almost immediate shutoff, whereas gate valves are not able to act as quickly. This makes ball valves a better choice for applications where fast cycle speed is desired. The 90° operation of ball valves makes them faster to cycle, both manually and with an actuator.
Q: 6.What is the standard for a trunnion ball valve?
A: Trunnion-mounted Ball Valves (TMBV) meet the requirements of API 6D and can be offered with API 6D monogram. The valves are certified Fire Safe as per API 6FA, API 607 and ISO 10497, and meet Fugitive Emission requirements of ISO 15848 and API 641.
Q: 7.What is the difference between a floating ball valve and a trunnion ball valve?
A: A trunnion ball is attached and centred inside the valve body through both a top shaft -the valve stem- and a bottom shaft – the trunnion. A floating ball is attached to the valve body only through the valve stem. As a result, the floating ball ''floats'' in the valve seats.
Q: 8.How does a trunnion ball valve work?
A: The ball is located inside the trunnion and is rotated against the stem to regulate flow. There are seals inside the stem and seat to keep fluid from leaking. Some trunnion valves also feature an adjustable gland packing box that allows it to be adjusted to handle different pressures.
Q: 9.When to use a trunnion ball valve?
A: Therefore, in high pressure applications, many people choose trunnion style valves instead of floating ball valves. This is because they're more versatile and can withstand higher pressures and they're easier to operate in such conditions. In addition, most of the time floating ball valves are much smaller.
Q: 10.What is the difference between a floater and a trunnion ball valve?
A: A general rule of thumb is floating ball valves are best for low- to medium-pressure scenarios, and trunnion ball valves are best for high-pressure projects. However, trunnion valves are the most versatile, so they will work in most cases.
Q: 11.When to use a trunnion mounted ball valve?
A: Trunnion-mounted valves are specified when larger pipeline sizes and high-pressure conditions are involved (class 600 and above). Knowing the key differences between the floating and trunnion-mounted designs is essential to meet process, budget, performance, and maintenance targets.
Q: 12.Does it matter which way a ball valve is installed?
A: Ball valves may be installed in vertical or horizontal pipe runs, they are bi-directional therefore flow direction is not critical, however the best practice is to set up the valve handle to point in the direction of flow whenever possible.
Q: 13.How do I know what size ball valve I need?
A: To do this, you'll need the following measurement: External measurement of the male thread on the fittings: Similarly, if the external diameter of the male thread is close to a particular size, you'll need a ball valve of the same size. A 2″ external diameter, for instance, would require a 2″ ball valve.
Q: 14.How to grease a trunnion ball valve?
A: Balon trunnion mounted valves are equipped with grease injection fittings that may be used when attempting to restore the seat seal or to deliver grease to the surface of the ball. Grease should be injected into the upstream injection fitting when attempting to restore the seat seal.
Q: 15.How do Trunnion Mounted Ball Valves Work?
A: Trunnion mounted ball valves are quarter-turn valves. This means you need to turn the actuator on a 90-degree angle to turn the valve on or off. Once the actuator is turned the ball rotates so that the bore faces the pipeline and medium can flow freely. Another turn of the handle moves the ball so that the bore faces away from the pipeline stopping the flow.
For example, you have to regulate the flow of oil through a critical process unit. You will install a three-piece, half-bore, split-body ball valve like SIO Trunnion Mounted Ball Valve to get the job done. To start the flow of oil, you will move the actuator on the valve 90 degrees one way (usually clockwise). The actuator is connected to the stem of the valve which in turn is connected to the ball. As the stem rotates it moves the ball as well so that the side of the ball with the bore faces the pipeline. Since this is a half-bore valve the flow of oil is restricted, lowering the pressure with which the stream flows.
Q: 16.Can you weld a ball valve?
A: If the valve does not have extended ends for butt welding, valve disassembly is needed prior to welding to prevent welding heat from damaging the seats or seals. Valves with Socket Weld, Sil Braze, or Solder Joint ends should always be disassembled prior to welding.
Why choose us?
Our factory offers reliable and fast delivery of Trunnion Ball Valve products across the world.
Our company with its strong technical force as the backing, whether in performance or quality can meet your work requirements.
We offer flexible customization options for our Trunnion Ball Valve products to meet unique customer requirements.
Our company response to the international trend, relying on our elite dedicated to international customers to provide quality Fully Welded Trunnion Ball Valve.
We offer a variety of Trunnion Ball Valve products that are guaranteed to meet and exceed customer expectations.
Our corporate mission is to satisfy customer needs and enhance corporate competitiveness with superior products and services.
As a Chinese manufacturer, we provide top-notch Trunnion Ball Valve products and reliable service.
The company is well-equipped, with advanced testing means and complete process means, and strictly follows the national quality standards for similar products in production and processing.
Our factory provides exceptional value for high-quality Trunnion Ball Valve products and services.
We must always hold the "magnifying glass" in our work, be meticulous about each node, each process, and every place that needs to be checked or paid attention to, and do a good job in process control and node control little by little!